Torque wrenches

HYTEM torque wrenches are laboratory quality and accurate tools. They are used to properly install or disassemble a wide range of coaxial connectors.

There are designed with a preset torque value and made with durable and rugged material. To determine which torque wrenche is the right for your application you must know wrench size and preset torque (depending on your coaxial connector).

There are three different design of torque wrenches

 

  • Screwdriver type

TWScrewdriver

 

 

  • – Break-over type

TWBreakover

 

 

  • Click type.

TWClick

 

Part numberTypeSuitable connectorsWrench size (in)Preset torque (in-lbs)
11.01.162ScrewdriverSMA, 3.5mm, 2.92mm, 2.4mm5/16 (8 mm)8 (0.9 Nm)
11.01.163ScrewdriverSSMC5/322
11.01.164Break-over1.0mm15/644
11.01.165Break-overSMC15/643
11.01.166Break-overSSMC5/322
11.01.167Break-overTNC5/812
11.01.168Break-overTNC9/1612
11.01.66Break-overSMA, 3.5mm, 2.92mm, 2.4mm5/16 (8 mm)8 (0.9 Nm)
11.01.169Break-overSSMA1/45
11.01.170Break-overN, 7mm3/4 (19 mm)14
11.01.171Break-overN25/32 (20 mm)14
11.01.172Break-overN, SC13/1614
11.01.173ClickHN7/816
11.01.101ClickSMA, 3.5mm, 2.92mm, 2.4mm5/16 (8 mm)8 (0.9 Nm)
11.01.174ClickSSMA1/45
11.01.175ClickSMC1/43
11.01.176ClickSSMC5/322
11.01.99Click7/16 DIN27 mm221 (25 Nm)
11.01.96Click7/16 DIN32 mm221 (25 Nm)
11.01.95ClickN3/4 (19 mm)13
11.01.177ClickN18 mm13
11.01.178ClickN25/32 (20 mm)13
11.01.179ClickTNC5/813
11.01.180ClickTNC9/1613
11.01.181Click7mm3/412
11.01.182Click1.0mm5/16 (8 mm)4
11.01.183Click4.1/9.5 MIN DIN22 mm90 (10 Nm)